節能型三機一體除溼乾燥機

  • 產品系列:TCDE系列
  • 型號/ TCDE-xxx共9款

節能型三機一體的設計系統更為簡化,不僅減少系統之耗電量,功效高,超節能省電高達60% ,且體積小,不占空間,特別適用於無塵車間。不需接冷卻水,故移動方便。構造簡單,機器信賴度高。全機採用微電腦控制,操作簡單,性能穩定,能耗更低,乾燥風量 30~200 m3/hr 。此外也針對光學級產品之生產制造而設計光學級節能型三機一體除濕乾燥機,以滿足客戶不同之需求。

相關資料下載

產品簡介brief introduction

 

產品型號

Model

TCDE-15 TCDE-25 TCDE-50 TCDE-75 TCDE-100 TCDE-150 TCDE-200 TCDE-300 TCDE-400

料桶容量

Hopper Capacity

KG 15 25 50 75 100 150 200 300 400

乾燥電熱功率

Drying Heater Capacity

KW 3 3 4 4 6 9 12 15 18

乾燥風機功率

Drying Blower Capacity

KW 0.18 0.25 0.37 0.55 0.75 1.1 1.5 2.2 3.0

輸送風機功率

Convering Blower Capacity

KW 0.75 0.75 0.75 0.75 1.1 1.1 1.1 1.1 1.1

處理風量

Air Capacity

L/min 50 65 70 82 120 155 195 305 410

系統電源

Power Supply

V AC380V,3P 50/60Hz

控制電源

Control Voltage

V AC220,1P

總功率

Total Power

KW 4.5 4.6 5.5 6 7.5 11.5 15 18.4 22.5

電源線規格

Wires Specifications

mm2 4×4 4×6 4×10

電源線長度

Wires Length

M 6

外觀尺寸

Dimensions

L(mm) 0.815 0.815 0.897 0.932 0.968 1.169 1.197 1.63 1.676
W(mm) 0.837 0.837 0.897 0.932 0.968 0.998 0.998 1.036 1.12
H(mm) 1.587 1.797 1.898 2.03 2.16 2.264 2.355 2.646 2.66

露點

Dew point

°C

-40以下

Below-40

料口管徑

Material Pipe Size

 inch 1.5

料杯(成型機上)

Hopper Receiver

型號
SR-3E SR-6E

機器重量

Weight

KG 159 160 182 205 217 316 332 400 430

選配

Option

1. 露點顯示/Dew-point Indicators     2. 旋風分離器/Cyclone Separator     3.高溫 /High Temperature(150°C~180°C)

產品特點distinguishing feature

 

特點

◆ 集除濕、乾燥、二段送料三種功能於一體,並可選擇三段送料功能。

◆ 穩定供應-40露點的除濕空氣大幅度提高產品品質。

◆ 耗電低、功效高。(每小時耗電量0.6度,傳統型耗電2.5度)

◆ 雙層保溫乾燥料桶採用下吹式風管設計,防止熱能流失,提高乾燥效率。

◆ 全不銹鋼上、下送料系統,避免原料污染。

◆ 封閉式循環除濕氣及運料系統,可避免乾燥後的原料因接觸外界空氣而再度回潮。

◆ 採用無觸點固態繼電器控制加熱。(選配)

◆ 故障智能警報,時間智能預約。

◆ 光學級除粉式三機一體專用於無塵或淨化車間。

◆ 多重保護裝置。

◆ 採用國外高級進口零組件,提高性能及延長使用壽命,節省維修成本。

◆ 外型粉體烤漆,美觀大方。

◆ 結構簡單緊湊,機器占地小,節省空間,移動方便,可任意更換機臺使用。

◆ 設計人性化方便保養維修。

Features

◆ To integrate the function of dehumidifying , drying and two-stage conveying into single unit. Three- stage conveying function is optional.

◆ To improve the quality of finished products greatly thanks to supply stable dehumidified at -40 dew-point.

◆ Low power consumption , high efficiency ( power consumption for energy saving type with reading 0.6 KW.h while conventional type with reading2.5 KW.h)

◆ Double- wall insulated hopper dryers features down-blowing pipe design to avoid heat dispersion for improving drying efficiency.

◆ Feeding system is made of stainless steel to eliminate material contamination.

◆ Closed-loop circulation for dehumidified air & feeding system to avoid the possibility of moisture regain for absorbing outside air during material conveying.

◆ To adopt electromagnetic contactiess relay control heating. (option)

◆ Intelligent microprocessor control for faulty alarm & pre-heating setting.

◆ Optical - class powder- removing models are suitable for clean workshop.

◆ Multiple safety protection device.

◆ Using imported superb parts which enhance function and extend service life for saving maintenance cost.

◆ Powder coated frame of machine with exquisite appearance.

◆ Compact construction; small footprint to save space ; move conveniently for any machines use.

◆ optimum design for easy maintenance.

詳細資訊Detailed information

 

乾燥程式

◆ 在變缸除濕塔內急速降壓的同時,就能獲得-40的露點除濕氣。

◆ 除水除油篩檢程式將車間送來的壓縮空氣中的水份及油份過濾清潔,再送到除濕塔。

◆ 把-40至-50露點除濕氣(單向輸送)不停的送到密封式真空除濕料桶,將料桶內所有原材枓的濕氣吸乾。

◆ 該系統是單向送氣,無須使用再生除濕氣。

Drying Procedure

◆ Low dew point -40 of dehumidified air will be obtained simultaneously by reducing pressure rapidly in the dehumidifying tower.

◆ Excessive oil and water content from compressed air supply of workshop will be filtered before sending to dehumidifying tower.

◆ -40~-50 dew point of dehumidified air will be continuously delivered to close hopper dryer until moisture expelled to dried.

◆ Air was delivered in one way direction under the system which no required regeneration of dehumidified air.

 

 

 

原料

Material

乾燥溫度

Drying(1) Temperature(°C)

乾燥時間

Drying(2) Time(hr)

乾燥能力/Drying Capacities(kg/hr)
TCDE-15 TCDE-25 TCDE-50 TCDE-75 TCDE-100 TCDE-150 TCDE-200 TCDE-300 TCDE-400
ABS 80 3-4 3.5 5 10 18 25 38 50 76 100
POM 100 2 7.5 13 25 30 50 75 100 150 200
PMMA 80 2-3 7.5 12.5 17 22.5 35 46.5 58.5 100 133
IONOMER 90 4-5 3.2 5 10.5 12.5 20 25 36.5 60 80
PA6/6.6/6.10 75 4-6 3 4.5 9 10 17 25 34 50 68
PC 120 3-4 6 7.5 13 16.5 25 38 50 76 100
PU 90 2-3 7.5 12.5 17 22.5 35 46.5 58.5 100 133
PBT 130 3-4 6 8 13 17 24 36 48 72 76
PE 90 1 15 25 50 70 100 150 200 300 400
PET 160 4-6 5.5 7 9 12 17 25 34 50 68
PETG 70 3-4 6 7.5 13 16.5 25 38 50 72 100
PPO 110 2 10 15 25 37.5 50 75 100 150 200
PP 90 1 15 25 50 70 100 150 200 300 400
PD(GP) 80 1 15 25 50 70 100 150 200 300 400
PSU 120 3-4 5 7 13 17 27 36 50 72 100
PVC 70 1 15 25 50 70 100 150 200 300 400
SAN(AS) 80 2 10 15 25 37.5 50 75 100 150 200

 

工程塑料乾燥曲線圖

Engineering Plastic Drying Curve Chart